certifications & ratings: w recommended design practice - ies rp-19-01roadway sign lighting w retrofit cover assemblies compliant to ul-1598 wet locations w complete fixture compliant to ul-1598 wet locations w csa 22.250 w ansi c136.31-2001 (vibration) w mil std 810f (salt / fog) features & benefits: w complete performance 5 year warranty w mercury free w >70% lumen maintenance after 60,000 operating hours w long lasting / low maintenance w low power consumption offers 60-70% energy savings vs. 250w mv w superior color rendition index compared to hps; lps; mh; mv w instant on/off operation - no cool down or warm up time required for full illumination w resistant to roadway vibration and shock w universal input 100-277 vac (480vac verseions availble) w weather/corrosion resistant lamp assembly and housing mechanical information: fixture weight: 25 lbs - retrofit cover assembly, holophane 25 lbs - retrofit cover assembly, ge 32 lbs - complete fixture mounting (see pages 2-3for specific details): dialight complete unit including box and cover ( 22.7" x 20.5" x 12.3") holophane sign-vue enclosure box ( 22.7" x 20.5" x 5.5") (supplied by others) ge versaflood ii signliter ? box (19" x 17.37" x 9") (supplied by others) electrical specifications: system power consumption (nom +/- 10%): 63w 100w initial lumens: 4,000 (63w) 4,900 (100w) operating voltage: 100-277 vac, 50/60 hz 347, 480vac (consult factory) transient protection: ansi c136.2 (600v) american national standard for roadway and area lighting equipment - luminaires, voltage classifications emi/rfi (noise suppression): fcc title 47, subpart b, section 15, class a de vices power factor: > 0.90 thd (typ): 10% @ 100-240 vac 20% @ 277 vac operating temp: -40f to +165f (-40c to +74c) construction: body: polyester / epoxy powder coat gray ral 7040 lens: high impact polycarbonate with uv stabilizer and hard coated for abrasion resistance cover: polyester / epoxy powder coat gray ral 7040 photometric information: cct: 5300k (cool white) cri: < 70 all values typical unless otherwise state patents pending streetsense? rs series led roadway sign light part number color description system power consumption (nom +/- 10%) RS5C4F-C cool white dialight complete fixture 1 box and cover assembly includes wiring box and light engine for mounting on a flat plate 63w rs5c4k-c cool white dialight complete fixture 1 box and cover assembly includes wiring box and light engine for mounting on a flat plate 100w rs5c4f-h cool white dialight retrofit cover assembly (only) for use on holophane sign-vue enclosures (see page 2 for detail) 63w rs5c4k-h cool white 100w rs5c4f-g cool white dialight retrofit cover assembly (only) for use on ge versaflood ii signliter ? enclosures (see page 2 for detail) 63w rs5c4k-g cool white 100w application: dialight introduces the state-of-the-art streetsense? led fixtures designed specifically for new and retrofit installations of roadway sign lights. all of dialights long life led luminaires are designed to meet the most demanding specification criteria while offering maxiumum energy savings, reduced maintenance costs, and a superior quality of light. ordering information 1 all units above intended to be mounted under sign only and on a fixed plate mounting structure. not intended to be mounted inverted on top of sign or pipe or pole mount. note: mounting plate provided by others www.dialight.com shown using dialight's complete unit meets buy american for projects requiring buy american certification, consult factor y for additional information and details
dots and other agencies must now choose alternative lamp sources for the replacement of these fixtures and for new construction or additions. under the federal energy policy act (epact 2005) and the energy independence and security act, conventional mercury vapor lamps and all 150-500 watt metal halide ballasts were mandated to be substituted with more energy efficient alternatives. going green the 63 or 100w streetsense led fixture can typically replace a 250w or higher mercury vapor / metal halide unit while still meeting or exceeding the roadway sign light specifications, so it delivers co2 reduction and energy savings of 60-70% over conventional lights. this efficiency is further enhanced by its instant-on/off ability with no necessary warm up to achieve full illumination. in addition its green credentials are assured by the fact that it is 100% mercury free and dark skies friendly; this is assured by its highly efficient optics that focus the light just where its needed, avoiding light spill. maintenance free the rugged, solid state streetsense fixture is not only an energy efficient alternative, but its projected fixture service life of ten years (50% on-time, >70% lumen maintenance after 60k hours) also brings other significant benefits. these include the elimination of frequent lamp changes and reduction of overall maintenance costs as well as reducing exposure of maintenance workers to dangerous highway traffic. for road users they deliver added safety by producing a quality of light that is vastly superior to conventional sources and by eliminating dark road signs resulting from burned out conventional lamps. ease of installation dialight offers fixture assemblies for new applications as well as retrofit applications. a unique led retrofit cover assembly kit option will adapt to most ge or holophane boxes shown below. the retrofit involves only the removal of the existing fixtures cover, lamp and reflector which is then replaced with the dialight led cover assembly. most of the existing wiring connections remain untouched, so the conversion is quick, simple and easy. thus installation time both time and money. streetsense ? led roadway sign light www.dialight.com the dialight led retro-fit cover assemblies for ge versaflood ii signlite and holophane sign-vue ge versaflood ii signliter typical dimensions holophane sign-vue typical dimensions typical cct values high pressure sodium 2100k incandescent 2800k halogen 3100k fluorescent (standard) 3500k direct sunlight 4900k metal halide 5000k dialight led rs series (cool) 5300k natural daylight 6500k indirect sunlight 6700k
dialight complete fixtures dialight part numbers RS5C4F-C and rs5c4k-c streetsense? rs series led roadway sign light mechanical dimensions 7.3 (186) ? 1 npt threaded hole both sides 12.3 (312) led fixture angle is 104o fixed at factory retrofit cover assembly for use on holophane sign-vue ? enclosures dialight part numbers rs5c4f-h and rs5c4k-h wire harness (supplied by dialight) power supply (supplied by dialight) ground strap (supplied by dialight) 7.3 (186) 20.5 (521) led fixture angle is 104o fixed at factory retrofit cover assembly for use on ge versaflood ii signliter ? dialight part numbers rs5c4f-g rs5c4k-g wire harness (supplied by dialight) power supply (supplied by dialight) ground strap (supplied by dialight) 7.3 (186) 20.5 (521) led fixture angle is 123o fixed at factory designs shown are for reference only. power supply shown above is for wiring purpose only. actual ps in unit may vary. inside box of dialight complete unit internal wiring attach ground terminal ring to lower housing connect incoming wires all incomming wires, power and ground supplied by others attach incoming green wire to grounding terminals drill 3/8" mounting holes though lower fixture base. 3 places. mount lower housing to sign structure mounting plate hardware to mount dialight box to sign structure supplied by others typical to comlete unit and to retro-fit cover assemblies www.dialight.com 22.7 (577)
sign width (ft) sign height (ft) # of fixtures fixture placement out from front of sign (ft) / down from lower bottom edge or up from top edge (ft) 1 wattage (w) average lluminanace footcandles (fc) illuminance uniformity max/min 8 8 1 4 ft / 1 ft 100 41.64 3.56 8 8 1 4 ft / 1 ft 63 31.5 3.98 8 8 1 6 ft / 1.5 ft 100 24.85 2.41 8 8 1 6 ft / 1.5 ft 63 18.16 2.65 10 12 2 4 ft / 1ft 100 52.97 6.97 10 12 2 4 ft / ft 63 37.50 5.92 10 12 2 4.5 ft / 1 ft 100 48.7 5.08 10 12 2 4.5 ft / 1 ft 63 34.51 3.98 10 14 2 4 ft / 1 ft 100 44.2 6.91 10 14 2 4 ft / 1 ft 63 34.37 6.03 10 14 2 4.5 ft / 1 ft 100 40.71 4.37 10 14 2 4.5 ft / 1 ft 63 32.85 4.22 10 14 2 6 ft / 1.5 ft 100 31.2 2.65 10 14 2 6 ft / 1.5 ft 63 24.4 2.67 14 14 3 4.5 ft / 1 ft 100 47.0 15.63 14 14 3 4.5 ft / 1 ft 63 36.65 14.96 14 14 3 6 ft / 1.5 ft 100 39.88 5.43 14 14 3 6 ft / 1.5 ft 63 30.33 5.22 photometric calculations below have been simulated based on dialight fixture ies files. scenarios provided are given to show projected future capabilities to meet various specifications. for accurate light output levels, a detailed photometric layout should be provided by dialight which will show the dialight fixture which best meets your indi- vidual roadway sign specifications. please email us at info@dialight.com and provide the following: - what is the width and height of the sign to be illuminated? - confirm the fixture will be located on a fixed plate mounted to the sign structure below the sign face - how many fixtures will be used to illuminate the sign? - what is the fixtures for spacing required for each sign size? - what is the average footcandles (cd) required on the sign? - what is the max to min uniformity ratio required? - what is the fixture mounting plate location relative to the bottom edge of the sign will each fixture be placed? example: how far out from the front of the sign face and how far down from the bottom edge of the sign? if a retrofit installation provide all of the information below plus the following: - what type of lamp fixture is being replaced (mh, mv, hps)? - who is the manufacturer of the currently installed fixture ge or halophane? what is the ge or halophane part number - what is the wattage or the fixture currently installed? streetsense? led roadway sign light light measurement data mdtsrsstsx001_c dialight reserves the right to make changes at any time in order to supply the best product possible. the most current version of this document will always be available at: www.dialight.com/assets/brochures_and_catalogs/illumination/mdtfsl3x001.pdf some typical photometric specification scenerios using dialights complete fixtures RS5C4F-C - 63w complete fixture rs5c4k-c - 100w complete fixture 1 where 1 fixture is shown for the 8 sign, placement of the fixture is on center of sign. where 2 fixtures are shown for the 10 sign, placement of the fixtures is 1.5 from left edge and 1.5 from the right edge of the sign. where 3 fixtures are shown for the 14 sign, placement is as follows: one fixture is 2 from the left edge second fixture center of sign, third fixture is 2 from right edge.
|
